Sunday, May 15, 2022

How To Draw A Camera Easy

You May Be Interested

Giving Your Object A Shadow

DRAW A CAMERA EASY Step By Step

Note: All distances should be the same, if you choose 1.5 inches for the first mark then use 1.5 inches as the rest of the measurements. If you are using regular sized paper then 1 inch is recommended.

Using your ruler make a mark about 1-2 inches right of “the bottom mark”.

Make another mark 1-2 inches from “the lower right mark”.

Make a 3rd mark about 1-2 inches up the left edge of the object .

Using your ruler, make lines to connect these 3 marks to make an outline. Your shadow outline should look like that in image 4.

Fill in this area as dark as you can with your pencil. This area is your object’s shadow. Press the pencil pretty hard and leave no space between each swipe of the pencil. If you find your shadow is as dark as, or lighter than, your right side you will need to go over your shadow again to make it darker. When you are done your shadow should look similar to that in image 5.

Create Different Effects With Different Exposures

When shooting a time-lapse video, its crucial to understand the correlation between exposure time and shutter speed. Shutter speed is the length of time your camera shutter is open with the sensor exposed to light. Its how long your camera takes to record a frame. The amount of motion blur that appears in each frame can be changed by adjusting the exposure time. Doing this captures different effects.

Short exposure time-lapse uses a faster shutter speed to expose film to light for a brief period. By doing this, the movement is given a stop-motion look, perfect for filming animals, sports, or other fast-moving objects without capturing unnecessary blur. Long exposure is the opposite. It uses longer shutter speeds to intentionally obscure moving elements in your landscape. Long exposure time-lapse is great for capturing stars in the night sky because it collects enough light to properly record while also giving the scene an ethereal quality. However, long exposure shooting is uncommon because of how challenging it can be to expose film for such an extended period. To compensate for the additional exposure, use a neutral density filter to dull the intensity of the light, especially if shooting in daytime.

Introduction: How To Draw: Anamorphic Drawing

An anamorphic drawing is a way of drawing that creates a 3-D effect when the drawing is viewed through a camera at a certain angle. The purpose of this instructable will be to create a very basic anamorphic drawing. This is a very basic tutorial and will only cover beginner level sketching techniques.

To complete this task we will set up a camera phone on a stand and draw a picture using the perspective of the camera. This will allow us to draw a picture exactly as it appears through the lens of a camera.

To the eyes of a human with depth perception, the illusion we will create is easy to see past, which is why we will be using a camera.

Take appropriate precautions when using the materials. When using your camera on the stand be careful not to knock your camera off to avoid damaging it.

Supplies Needed:

Recommended Reading: How To Draw Someone On Their Knees

How To Create A New Document And Set Up A Grid

Press;Control-N;to make a New Document. Set the Units to Pixels, and enter;800 x 600;for the width and height of the document. Then in the;Advanced;options, select;RGB,;Screen ,;and make sure to activate the Align New Objects to Pixel Grid box;before clicking;OK.

Activate the Grid and;Snap to Grid;. You’ll need a grid every;10 px, so simply press;Control-K;to go to;Preferences, and in;Guides & Grid;set Gridline every;to 10;and Subdivisions to 4. Don’t worrythe grid will help you work in an easy way, and it can also be enabled or disabled by pressing the keyboard shortcut;Control-“.

You can activate the;Info;panel in order to have a preview of the size and position of your shapes. Remember to set the measuring unit to;Pixels;from;Edit > Preferences > Units. This will greatly increase the speed of your work.

How To Create A Vintage Camera In Adobe Illustrator

How to draw a Camera Real Easy | Step by Step with Easy, Spoken Instructions

If you’re a lover of vintage cameras, this tutorial will bring you good memories. We’ll create this retro camera with basic shapes and using flat colors to get a very cool result. Our camera is inspired by the Leica M6.;

If you’re looking for inspiration for creating your own camera illustration, why not check out GraphicRiver.

Let’s start!

Read Also: Skull Eyes Drawing

Before You Learn How To Draw A Photo Camera Did You Know

These days, even the little kids know how to take a photo and have phones with built-in cameras. So, theres nothing new there. However, a couple of decades ago, that wasnt really the case, and people that had photo cameras were considered to be extremely cool. Still, for professional photography, the iPhones and such arent really that good.

Do you know when the very first photo was taken? Back in 1826, almost 200 years ago. By the way, a video camera operates almost the same way, with the exception that it takes 24 pictures per second, and when put together in a row, they create the illusion of motion for our eyes, and everything looks nice and smooth.

Cutting Out Your Object

Using your ruler, make a horizontal line that is perpendicular to the edge of your paper. This line should be about 1 inch above the highest point of your shadow and the line should not go through the drawing of your object.

To do this, start your line from the edge of the paper, when your pencil reaches the edge of the object, lift your pencil and resume drawing your line on the other edge of your object.

Untape the paper from your surface.

Cut along both parts of the line you drew. Next, cut along the edges of the drawn object that are above the horizontal cuts you have made . This should remove the upper portion of the background to your drawn object.

You May Like: How To Draw A Creepy Clown

How To Draw A Vintage Camera

Step 1. The first thing you need to do is draw a protective cover that holds the flashlight. It is usually flat-shaped on top of the chamber.

Step 2. Next, draw a cylinder shape for your lens housing. In this case, the body is long, because I almost always have the zoom attached to my camera.

Step 3. Heres a sketch for the front of the lens or glass as I call it. Draw a lens flare mark, then sketch in a ring around the lens barrel.

Step 4. You will finish the body drawing camera design. Sketch in Detailing goes to the last drawing step.

Step 5. To erase your mistakes, then draw in the groove lines on the lens, draw the buttons.

Step 6. Here is the line art for the camera. Now you can paint it or use your drawing on a character that you can be drawing.

How To Capture Time

How to Draw a Camera Cute and Easy

As soon as Apple introduced the time-lapse feature to their camera app in 2014, time-lapse video became more popular. A technique that was once found only in video editing software is now on nearly every mobile device. So whats the best way to make an amazing time-lapse video that stands apart from the rest? That depends on how you plan to capture the footage.

Smartphone:

Most phones have a time-lapse feature in their camera app. Be advised: you will need to record for an extended period, as 30 minutes equates to about 10 seconds of footage. Like a video camera, you will need a tripod to steady your shots. On an iPhone, you can either film a time-lapse or stitch one together from your photo collection, all without a video editor.

Video camera:

Most modern video cameras, including DSLRs, feature a time-lapse mode. These cameras feature hardware or software that mimics an intervalometer, an instrument used to regulate the amount of exposure the camera lets in at set durations between frames. Some intervalometers are even attached to motion control systems that physically move the camera to specific marks while filming, giving the footage effects like pans and tilts when it is played at an average speed. Similarly to smartphones, you will need a tripod to steady your shots.

You May Like: How To Draw A Cute Penguin

How To Draw A Polaroid Camera

A DSLR camera, thanks to powerful optics, has high-quality images, which is achieved by choice of settings. The variety and change of lenses provide ample opportunities in photography. Lets think about how to draw a camera with a pencil of such an intricate design.

At the first stage, with a hard pencil of mark T, we schematically depict three parallelepipeds. One large, small in the front left and larger in the middle in the back. In the centre we will draw a lens in the form of an elongated cylinder.

Next stage. We draw the lens. Since it should consist of several parts, divide the cylinder into five, alternating: wider, then narrower. Lets draw them with a soft pencil of the M mark. In the middle above, we will depict a photo-flash.

The camera consists of several parts: lets draw a start button, a setting window, and a cassette cover on the side. Add strokes to the middle circles of the lens cylinder, add volume circles in the centre, and round all the details.

The final stage. Shade the convex parts of the camera with a soft pencil, trying to give them volume. We cover the rest with hard, applying frequent small strokes one to one. The drawing of the camera is complete.

Camera Drawing Step By Step For Kids

June 26, 2020Drawing Tutorial Category: Digital Products

This is a beautiful camera with very stylish design and colors. The earliest camera structure is very simple, including only the dark box, lens and photosensitive materials.

Step-by-step tutorial to teach you how to draw this beautiful camera, very simple. If kids like it, let them try following the steps below!

1. Draw a large lens first, which is composed of many circles.

2. Draw two horizontal lines. Then draw two curves connecting their ends to get the camera’s body.

3.On the body, draw two horizontal lines and two vertical lines.

4. Draw the viewfinder and shutter at the top.

5.Finally, simply color it and the beautiful camera is done!

Don’t Miss: How To Draw A Wave Step By Step

Setting Up The Object

Place the object centered and near the bottom of the paper and make 1 corner of the object roughly point towards you. Arrange the paper and stand so that your camera/camera phone can rest on the stand and see the entire object, but also have the paper close enough to you so you can draw on it. When looking through the camera, the only thing in the object’s immediate background must be the paper, if there is any background other than the paper then you need to do one of the following:

1. Move the object and/or paper around until the only thing in the object’s background is the paper.

2. Adjust the stand/camera phone by pitching the camera downwards until the object can fit properly in the picture.

3. Get a smaller object or a bigger piece of paper.

Image 1: Bad because the object is not angled so a corner points roughly towards you

Image 2: Bad because the object has something other than the paper in its immediate background.

Image 3: A good example, has a corner facing the artist and has nothing but paper in its immediate background.

How To Draw A Camera

How to draw a Camera – Easy step-by-step drawing lessons for kids

Click HERE to save the tutorial to Pinterest!

The;camera;is a familiar piece of technology. Today, many people carry a camera with them everywhere as part of their cell phone, tablet, or laptop. For most of human history, the only way to take a selfie was to have someone draw or paint your likeness. The earliest cameras were also very different from those we use today.

For centuries, people had used a device called the;camera obscura;to aid in drawing and to safely view solar eclipses. Using a camera obscura was like being inside a giant camera – it consisted of a small, dark room with a tiny hole to allow light in. An upside-down image of what was outside could be seen on the wall, but it wasn’t recorded unless you drew it.

Scroll down for a downloadable PDF of this tutorial.

In the 1820s, a technique was developed that allowed the image to be captured on a metallic photographic plate. Later, the plate was replaced by flexible film. Early cameras had to be large to hold the film, and some were very heavy. Taking pictures also took longer. In order to have a portrait taken, a person had to sit very still for several minutes. The film would then be removed from the camera and processed in a dark room using various chemicals.

If you liked this tutorial, see also the following drawing guides: Horse Head, Cartoon Fish, and Curly Hair.

Read Also: How To Draw A Deer Head Step By Step

Next Draw The Flash Of The Camera

Draw the upper half of a trapezoid shape at the top middle of the cameras body. This creates the flash of the camera.

The purpose of a cameras flash is to illuminate a dark scenery, usually at nighttime. However, it can also be used to capture objects moving at high speed or changing the quality of light.

How To Draw A Cartoon Camera With A Great Lens

Learn how to draw a simple cartoon camera made from rectangles and dark colors. In this tutorial, you will learn how to assemble the perfect illustration of a camera using simple tips and tools found in most vector application. Ready? Let’s draw now! 🙂

You can purchase this illustrationhere!

Step 1

First, draw the object using mostly rectangles and circular shapes. The body of the camera is made from a large rectangle with round corners. Two stripes are visible on the bottom and on top. For the lenses, six different circular shapes are needed. Finally, you can sketch three buttons on top of the camera using small rectangles.;

Step 2

Great! You can continue working on the object by adding some plain colors. All three buttons can be filled with a black color. The body of the camera can be colored with a dark grey color and the two stripes can be slightly brighter. For the lenses, simply look below to see how colors were added.;

Step 3

Time to use the gradient tool to add some cool effects. On most shapes of the illustration, add a second color . This second color will add some depth and volume to the object.;

Step 4

Inside the lens, draw a small orange circle and two additional shapes . Then, blur the outlines and play with the opacity of these shapes to end up with something subtle. You can see the result in the next step.;

Step 5

Step 6

The result: a nice and clean cartoon camera! 🙂

Don’t hesitate to create your own model and draw your own special effects. Have fun! 🙂

Recommended Reading: How To Draw A Bull Skull

Marking The Upper 3 Corners

Now we are going to mark the outer corners that are not touching the paper .

Each picture marked “Camera View” has an alternative camera angle that is taken at the same time so for example in images 2 and 3 the pencil is in the exact same spot. This is the reason we use the camera, because you need to make a mark on the paper where the camera “sees” the corners of the object. You will need to look through the camera to create these 3 marks.

Learn How To Draw A Photo Camera Quickly

How To Draw A Camera Step By Step – Camera Drawing EASY

This video guide is all about precision. Every single part needs to be smooth. Keep that in mind while working on our how to draw a Photo Camera tutorial and youll be fine. So, the lens comes first . Youll need a series of simple circles connected to each other via straight lines. Remember: were dealing with a three-dimensional image.

Once the circle in the middle is in place, add three more inside of it. Next, move on to the body of the lens with those lines I mentioned earlier . Cover the side of it with a number of half-circles . Alright, were done with the first half of the how to draw a Photo Camera tutorial. The rest is easier but comes with more details.

Just watch the video closely and follow my lead . Divide it into three parts the middle and the sides. The central part is easy . The sides are almost identical to each other and look a bit like drinking bottles.

Also Check: How To Draw A Simple Horse

How To Draw A Vintage Camera With Sepia Ink Liners On Toned Paper

In this tutorial I’ll show you the process of drawing a vintage camera and a cherry blossom twig, using sepia color ink liners, white ink pen and toned beige paper.;I use sepia colored liners, not black, because it creates a harmonious combination with the paper color, and also it reflects the delicate, mild look of this artwork.;

Drawing ontoned paper can be a very interesting experience for an artist. Its also convenient for fastsketching, because the color of the paper sheet is undertaking a big amount of the artists effort.;The rightchoice of paper tint is an important detail here, because if you draw on paper that’s toodark, it can be difficult to create obvious shadows and gain the contrastin your artwork. If the paper is too light, then it can be a problem with thedefinition of the highlights. However, there are no strict rules, and everythingdepends on your decisions.;

The bigadvantage of toned paper is that it creates value itself, so you can leave substantialparts of the paper untouched. Also it gives you the possibility toactually create highlights, not just rely on the contrast, as in the case oftraditional black and white drawings. Thats why this technique is so great for sketching and quick studies,and also very handy for large paper.;Itsimportant to know where to stop, because your drawing wont be so effective ifyou leave no blank paper.

More articles

Popular Articles