Sunday, May 15, 2022

How To Draw A Grad Cap

You May Be Interested

How To Draw A Graduation Cap With Diploma Video & Step

How To Draw A Graduation Cap

Use the videos and step-by-step drawing instructions below to learn how to draw a cartoon Graduation Cap and Diploma. Stay tooned for more tutorials!

Stay tooned for more free drawing lessons by:

All of the free art lessons on are good drawing tutorials for beginners and experienced artists alike. The online tutorials are easy to follow they teach you the how to draw basics while showing you how to draw fun cartoon characters step by step. Each cartoon character has a video drawing tutorial option, as well as step-by-step photos and written text to follow.

To draw this Graduation Cap and Diploma step by step, follow along with the video tutorial below and pause the video after each step to go at your own pace. You may find it easier to follow the step-by-step drawings below. The new lines in each step are shown in red, and each step is explained in the text below the photo, so you’ll know exactly what to draw in each step. You may want to open the video in a new tab and use both drawing methods! Take your time and draw at your own pace.

The step-by-step video tutorial:

Intro: Start off with a pencil sketch. In the beginning stages, dont press down too hard. Use light, smooth strokes for sketching.

Step 2: At the top, draw another angled line for the back portion of the graduation cap. The resulting shape should be similar to a diamond.

  • Start

How To Draw A Graduation Cap

This article was co-authored by wikiHow staff writer, Hunter Rising. Hunter Rising is a wikiHow Staff Writer based in Los Angeles. He has more than three years of experience writing for and working with wikiHow. Hunter holds a BFA in Entertainment Design from the University of Wisconsin – Stout and a Minor in English Writing.There are 9 references cited in this article, which can be found at the bottom of the page. This article has been viewed 147,619 times.Learn more…

A graduation cap is really recognizable and has a distinct shape that may seem difficult to draw, but its actually made of a few simple shapes. You can either draw the graduation cap like youre looking down at it from the top or like youre looking up at it from the bottom. While youll use the same basic shapes for each view of the cap, whats visible in the drawing will vary slightly. Once youre finished, personalize your drawing with your own schools colors!

Rhinestones Are A Graduates Best Friend

Image Source: The Vintage Modern Wife

If standing out in a sea of graduation caps is your goal, rhinestones are the way to go. Line your graduation cap with a sparkling rhinestone trim and decorate the center with your initials. If your ceremony will take place outdoors, the crowd is sure to be dazzled.

Also Check: How To Draw A Simple Palm Tree

Finish Off Your Graduation Hat Drawing With Some Color

Now that you have finished your graduation hat drawing, this is the part where you can complete it with some amazing colors!

We kept the colors more muted with some dark grey for the hat itself and a darker yellow for the tassel.

These are just a suggestion, but you could use any colors that you love for this picture. If you drew any extra details such as someone wearing the hat or some decoration on it, then you can incorporate more color into these aspects as well.

We look forward to seeing which incredible colors and art mediums you choose to finish off this drawing!

How To Make A Graduation Shadow Box

How to Draw a Graduation Cap and Diploma

In Cricut Design Space, spell out the phrase youd like on top of the glass of the shadow box. Measure it so that it will fit on the glass. I used the Cricut Varsity font.

Cut out the image from Vinyl. Peel away the excess. Apply a bit of transfer tape to the top of the image. Then peel off. Place the image/transfer tape on the glass and use the Cricut tool to adhere.

The last thing you need to do is peel away the transfer tape.

For the last step arrange the items you want in the shadow box.

Thats it! There are so many fun possibilities when it comes to decorating graduation caps! You can even design your own lettering if youd like.

Don’t Miss: How To Draw A Simple Palm Tree

Dont Think Too Much And Go With Your Heart

If you are worrying too much about the decoration of your graduation cap, you will probably lose the fun out of it.

You might be thinking too much rather than enjoying while decorating the cap.

Be happy and proud of your success!

If you are wondering about the theme of the decoration, the best solution is to follow your heart.

Think about the moments that you admire and things that you love.

Based on that, pick something that will mean something to you, your family, and your friends.

Materials For A Graduation Cap Drawing

  • Eraser. Large ones you can hold in your hand do a much better job than just the pencil tips.
  • BlackSharpie Marker. These fine point permanent marker pens make nice black outlines, have a good tip for coloring, and never bleed when they get wet. Use them with good ventilation and add extra paper underneath to protect your tables.
  • Prang Crayons. These are a bit softer than other crayons so they sometimes look like oil pastels. They also have a some nice brown shades that Crayola does not have unless you buy their larger boxes.
  • Crayola Crayons. The reliable brand that always works well. The 24 pack has some of my favorite golden orange and yellow colors that seem a bit richer and warmer than the ones Prang has.

Read Also: How To Draw A Duck Step By Step

Protect And Preserve Your Grad Cap

Graduation is a big cause for celebration and the day youve been tirelessly working toward and dreaming about for years. Why not honor this momentous occasion with the perfect grad gift? Put your decorated mortarboard on display in a graduation cap frame and preserve it for future generations. Hats off to this years college grads!

Put The Decorations In The Spare Graduation Cap

How to Make a Graduation Cap

Now it is time to apply your idea to the graduation cap.

If you are planning on using glitter paper, glue the four corners of the paper and attach it on top of the cap.

You will need to make a small hole for the button in the middle of the cap.

Use an Xacto knife to cut around the button. For some designs, you also need to cut a hole for the tassel.

Using the glue gun or white glue, attach other items like stickers, beads, flowers, etc.

If you want to use any quote in your graduation cap, you can cut the little letters from different colored glitter papers.

Then, using a glue gun you can attach the letters to the graduation cap.

If you want to decorate the cap with your favorite anime character, you can do that as well. For example, you can print the character on gloss or matte paper. Use an Xacto knife on a cutting mat to cut out the outlines precisely. Cut the shape smoothly for a neat look. Then use white glue or glue gun to attach it to the cap.

Read Also: Kermit The Frog How To Draw

Pick A Theme Based On Your Personality And Achievements

The first thing you will need to do is to decide the theme of the decoration. You can pick anything based on your preference.

You can get inspiration from graduation cap toppers on Amazon:

Its also easy to buy your favorite graduation cap topper and glue it on.

Ideas for DIY would include sharing a funny meme about graduation if people know you for your good humor.

Or, you can share a favorite success quote if you are career-oriented.

If you are on the sports team, you can use a team cheer.

Those are some of the many ideas that you can choose for your graduation cap decoration.

Drawing A Graduation Cap From Above

  • 1Draw a horizontal rhombus for the top of the cap. Start by drawing a straight diagonal line going up from the edge of your paper. Dont make the line too long, or else you wont be able to fit the rest of the cap on the page. At the end of your first line, add another diagonal line going down thats the same length and angle as the first one. Make a line that is parallel to the first one you drew starting from the end of the second line. Finally, connect the ends of the first and last line you drew.XResearch source
  • The rhombus will look like a sideways diamond where each side is the same length.
  • You can use a straightedge or ruler if you want to make the sides of your rhombus precise.
  • 2Add 2 slanted vertical lines down from the sides of the cap. Start your line halfway along one of the bottom sides of the cap. Extend the line down slightly slanted away from the center of the cap so its half the length of one of the rhombuss sides. Draw another diagonal line down from the center of the other bottom side so its the same length as the first one you drew.XResearch source
  • The diagonal lines coming down from the top of the cap form the sides of the skullcap, which is the part that goes around your head.
  • Sketch in your lines lightly just in case you have to erase and draw the curved line again.
  • You can draw the string coming down from either the left or right side of the button.
  • 7
  • You May Like: How To Draw A Harley Davidson Logo

    Next Draw The Underside Of The Graduation Hat

    You have the flat top of the hat, so now you can draw the underside, which will be the part that goes over your head.

    Use some straight lines down from the base of the flat top for the side of this portion, and then use a curved line underneath that connects the two vertical lines.

    Thats all you have to do for this step, and once you have added this portion, you are ready to move on to step 3!

    How To Make A

    How to Draw a Graduation Cap in Adobe Illustrator
    • 9×9 photo
    • Glitter sheet

    Step 1: Take your picture and place it on top of the cap. Make sure you measure the size of the button in the center of the cap and cut it out from the picture so that you can still hang your tassel.

    Step 2: Glue your photo to the cap.

    Step 3: Take your felt and cut out four circles varying in size.

    Step 4: Cut a slit in the middle of each circle and fold over so the circles create a cupped shape. Use a glue gun to hold it together.

    Step 5: Glue each cupped petal on top of each other.

    Step 6: Take your glitter sheet and cut out four leaves.

    Step 7: Glue your completed flowers to the bottom of the cap and add your leaves.

    Recommended Reading: How To Draw An Elephant Head

    Give Your Support Team A Shoutout

    You surely couldnt have made it these past four years without your support team. Whoever or whatever may have helped you earn that diploma deserves some appreciation. Use your graduation cap as a canvas to thank them for being a shoulder to lean on when the nights were late and the coffee wasnt strong enough.

    How To Diy Your Graduation Cap

    So I am graduating this semester and was reminded of decorating my graduation cap. I began to look up videos and how-tos, but none of them really helped me, so I decided to make my own Instructable!

    *Note: There are two options of decorating caps- directly on the cap and on cardstock paper to attach onto the cap. This instructable is for the latter.

    Recommended Reading: How To Draw Kermit The Frog

    Diy Graduation Cap Decoration Ideas

    Ive noticed a trend lately of I know that this is not allowed at some schools, but I still think the idea is genius! Ive seen all kinds of graduation cap decorations ranging from inspirational to funny. I think that it is a great way to celebrate what is a pretty amazing accomplishment.

    Im not sure if my kids can wear a decorated grad cap, but I thought that it would be fun to decorate some for them as a keepsake. Im going to take the decorated caps and use them in Graduation shadow boxes.

    Since I didnt want to change the caps they would be getting at school, I ordered an extra set of caps online. My plan is to replace the tassel with their actual graduation tassel in the shadow box after they graduate. Im also going to add a few photos of the commencement ceremony.

    For those of you with eagle eyes looking at the shadow box and wondering why its not complete. My oldest graduated in December from BYU. They dont do commencement in December so she will walk in April, but her graduation year is still last year. So we dont have an official graduation tassel or photo of her to use in the box yet.

    To decorate my Graduation Caps and matching shadow box, I used my Cricut Machine. In the Cricut Design space, I found loads of fun images perfect for graduation caps. All of the images shown in this post are Cricut files, not mine.

    How To Decorate Graduation Cap Without Ruining It

    Drawing a Graduation Cap in Easy way!

      This post has affiliate/referral links. Learn more.Congratulations on this exciting time you are graduating! Decorating your graduation cap shows your personality and your plan for the upcoming days.

      A grad cap decoration kit can kickstart your creativity for the occasion.

      Read on for more ways on how to decorate a graduation cap without ruining it.

      You will want glitter and bright colors in the cap that will represent your success and achievements.

      You do need to be careful because you only get one graduation cap for the ceremony.

      You can decorate the cap in a way that will help you stand out in the crowd of students.

      I have a few ideas that will help you to decorate your graduation cap in unique ways. Read on for a step by step guide for you to decorate your graduation cap.

      Read Also: How To Draw Heads From Different Angles

      S For Decorating Your Grad Cap

      1.)Place your grad cap facedown on a sheet of poster board. Trace around the square mortarboard with a pencil. Use a ruler to determine the location of the tassel button at the center of the grad cap.

      2.)Sketch out your design, keeping in mind that you will be cutting the straight line leading up to the tassel button, so make sure your final artwork will cover that area. Cut out adhesive letters to determine placement.

      3.)Cut out your mountain range from silver glitter paper. Use a horizontal strip of blue glitter paper for your lake. Next, cut a circle from gold glitter paper for the top of your cap button. Set letters and cut glitter paper pieces aside. 4.) Cut out the grad cap square then cut along the straight line toward the center of the cap. Next, cut a hole much smaller than the button outline to ensure a snug fit on your cap. Paint the sky light blue let dry. Use a sponge or cotton ball to add white clouds to the sky.

      5.) Swirl gold glitter glue and orange and yellow paints around the button area let dry. Carefully slide the poster board square onto the top of the grad cap turn over to find the front of the cap. Adjust the poster board accordingly before gluing to the mortarboard.

      6.) Glue the glitter mountain, lake, and sun to your cap. Print out the images that you plan to feature in your design. Cut them out and glue them in place. Cut four thin gold glitter paper strips glue them to the edges of your cap to frame your artwork.

      Whats Your Graduation Cap Theme

      First, think about the theme that youd like to use for your college grad cap. Do you want to feature a funny meme or catchphrase that was popular this year? Are you looking to create a design thats related to your specific college major? Want to proudly decorate your cap in your school colors or with a design that features your beloved college mascot? Or maybe youd like to showcase a clever line from a song or a heartwarming quote from a favorite book? The possibilities are endless!

      Keep in mind that youll inevitably be creating a piece of art thats sure to become a treasured keepsake, a handmade item that celebrates one of the most pivotal events in your life. More than likely, youll want to put this personal and meaningful artwork on display in a graduation cap shadowbox to preserve for years to come. Grad cap frames are ideal keepsakes to celebrate your school memories.

      Don’t Miss: Simple Wolf Howling Drawing

      You Can Refer To The Simple Step

      Step 1

      Start by drawing a rhombus or an inclined square with sides of equal length. This outlines the upper part of the hat.

      Step 2

      Draw lines parallel to the sides of the rhombus. Connect these lines to the three points of the shape with short lines. This forms the near edge of the top of the hat, giving it a three-dimensional shape.

      Step 3

      Draw two lines going down from the top of the hat, at half of each near edge. Notice that the lines diverge slightly outward at a diagonal angle.

      Step 4

      Use a long, curved line to wrap the bottom of the hat.

      Step 5

      Draw a small oval in the center of the top of the hat. Draw a parallel curve with one side of the oval to give it a three-dimensional shape. This is the button to which the tassel will be attached.

      Step 6

      Draw a pair of parallel curves that go diagonally from the node to the edge of the hat, then hang down. This is the sequence of tassels.

      Step 7

      Remove the guides from the rewind.

      Step 8

      At the end of the tassel, draw a circle. Below the circle, draw a series of flat ovals. This represents the top of the tentacle. Add the scroll to the hat.

      Step 9

      More articles

      Popular Articles