Thursday, May 19, 2022

How To Draw A Head Looking Down

You May Be Interested

Drawing Heads Looking Up

How to Draw a Head Looking Up and Down

Tip 1: Your chin, nose, mouth and eyes are all almost the same shape

While not exactly the same, the chin, nose, mouth and eyes are all similar triangles. This has to do with the angle — all of the triangles point upwards to mirror the triangle under the chin.

Tip 2: Ears usually start between the eyebrow and the top of the eye

When drawing the lines across the face, the ears should start somewhere between the top of the eyes and the eyebrows. They should end approximately at the bottom of the nose.

Keep in mind – Your sideburns can give you a hint as to where your ears start as well.

Tip 3: Know the landmarks of the face first

While drawing head angles is difficult, in order to get a good understanding of them at all you should already have pre-existing knowledge about the landmarks of the face. Drawing different angles is really understanding how to re-shuffle them and put them in different areas to give the idea of perspective.

There you have it! Hopefully, these tips have given you some insight into how to draw convincing head angles. These are very general tips — everyone looks different and everyones facial structure is different, so practice with multiple people in order to give you a wide range of experience!

Want to hone your skills with drawing faces? Check out our portraiture intensive class taught by Fei Lu herself, and check out our art mentorship classes where you work directly with an artist mentor to gain customized advanced learning!

Recent Posts

Drawing The Basic Head Shape

  • 1Draw a circle on your paper with a vertical line running through the middle. Use a pencil so youre able to erase your lines if you make a mistake. Lightly draw the circle in the center of a piece of paper so you have room to add features to it. Find the middle of your circle and lightly sketch a straight line that extends from the top of the circle down your sheet of paper so you know where the middle of the face is.XResearch source
  • Start by drawing your circle large so you have room to draw the features. Otherwise, your lines may get messy and it could be hard to draw correctly.
  • Tip: If you have trouble drawing a circle without help, either use a compass or trace something circular.

  • 2Make a guide line for the eyes a third of the way up from the bottom of the circle. Measure about a third of the way up from the bottom of your circle and use your pencil to make a mark. Use a straightedge to draw a horizontal line that extends past the edges of the circle to use as a guide for the characters eyes. Dont apply too much pressure when you draw the line since it will be hard to erase otherwise.XResearch source
  • Your measurements do not need to be precise. If you dont have a ruler, estimate the distance with the end of your pencil instead.
  • If youre drawing a female character, place the mark at a distance equal to of the circles diameter since female anime and manga characters tend to have rounder faces.
  • Outlines Of The Cheekbone

    We move down along the contour of the face, this time paying attention to the individual contour of the cheekbone.

    Once again, check this outline on the model pay attention how far it bends and compare to the outline of the eyebrow. Usually, the eyebrow would be extended forward a bit more than the outline of the cheekbone.

    The eye socket outline depicted in the previous step continues downwards with the cheekbone outline.

    You can also need to check the direction of the line that goes towards the jawbone .

    Recommended Reading: Permanoobs

    Place Facial Features Mane And Tail

    Once you feel content with the general sketch, it’s time to place a few details. Since you’ve already drawn a horse head from three different angles, you probably already know what comes next.

    Begin by loosely drawing two triangle shapes at the top of the horse’s head for the ears. Then, moving a little down, loosely sketch an almond eye. Afterward, you can go to the bottom of the nose and place an oval-shaped nostril. Just below that, indicate the horse’s mouth with a quick line.

    Whilst we’re placing details, feel free to draw your preferred mane and tail. If your horse is trotting or galloping, be sure to have it flowing in the wind.

    Defining The Cheekbones Curve

    How to Draw a Persons Face Looking Down

    The cheekbones curve defines another important contour of the face. It bends downward from one cheekbone to another, with its lowest point at the base of the nose.

    This virtual line is the border between the frontal part of the cheekbones and the upper jaw section.

    A portrait artist can simply keep this line in mind rather than actually draw it. Nevertheless, as a part of the head construction, this line helps to build the portrait geometrically correct and proportionate.

    Don’t Miss: How To Draw Spongebob And Patrick

    Drawing Heads Looking Down

    Tip 1: Find the circle of the head first

    Youll need to find the circle of the head when drawing any angle. If its kind of tricky to find the circle, as long as you find a little portion of it youll probably be able to figure out how big it is. This should always be the base for any head in order to draw your ball and shield to get going properly.

    Tip 2: All of your curves should curve downwards

    Just like when the head is looking up, when the head is looking down youll want the curves of your eyes, nose, mouth and chin to be curving down as well.

    Keep in mind – Your eyelashes on your eyes should also be pointing downwards, but they should thin out towards the corners of the eyes and get thicker going towards the center of the eye.

    Tip 3: Even if the individual is angry, the mouth should still be curving like a smile

    Even if the individual is angry/upset, youll need to draw the mouth overall as though its curving upwards so that it matches the perspective. Instead, youll draw the corners of the mouth curving down and furrow the eyebrows to give them that angry expression.

    How To Draw Anime Wizard Hat Step By Step

    The wizard hat is very common to fantasy anime and usually tends to be worn by female characters.

    Start by drawing an outline of the head/hair and draw the hat over top of this.

    The entire hat should be somewhat similar in shape to an upside down ice cream cone but with the top part hanging to one side.

    To show that the hat is tilted slightly upwards show some of its underside by drawing a pair of lines going from the bottom left and right tips of the hat towards the ears. These lines will define the inner/background part of the at.

    Erase the parts of the head and hair that are covered by the hat after you are done drawing its outer shape.

    To finish the drawing you can add a little band around the area where wizard hat transitions from the brim to the top. You can also draw the details of the hair.

    You can see a larger finished drawing of the wizard hat above with some basic shading.

    You may noticed that the background/inner portion of the hat is shaded slightly darker then the rest as usually less light will reach there.

    You May Like: How To Draw Ar In Bubble Letters

    How Long Does It Take To Learn To Construct The Head Using The Loomis Method

    Although the method is simple, and everyone can begin constructing heads in just a few minutes, it is also nuanced. Like with everything drawing related, expect the strong proficiency in the Loomis method to take months or longer. The alternative is that one may never learn to draw heads correctly, which would be a huge shame. Heads and faces are notoriously difficult to draw, and an artist with a good skill of drawing the head is sure to stand out. Without further ado, lets get started!

    Facial Features Placement In Loomis Construction

    How To Draw Faces | Female Heads: Downward Angle – Side View

    The hairline is established about a half way up from the brow line to the top of the head. The space between the eyebrow line and the hairline is attributed to the forehead.

    The distance from the tip of the nose to the brow is, on average, equal to the height of the forehead.

    Distance from the bottom of the chin to the base of the nose equals the space from the bottom of the nose to the brow.

    These landmarks are easy to find in Loomis construction. Of course remember that each person is different, and you will have to somewhat vary the construction based on the model you are working from and the likeness you are drawing to achieve.

    The fact that the distance between each marker is the same makes it easy, after getting this basic template down, we can adjust as we see fit.

    Construction of the face and head depends upon establishing the points of measurement. Any other way is bound by guesswork, which is a gamble any way you take it. For the one time you guess right, there are many inevitable mistakes. Andrew Loomis

    In summary the facial feature construction guide Loomis recommends follows the following distance sequence:

    These three distances are qual to each other:

    The brow to the hairline = The brow to the tip of nose = The tip of nose to the chin

    The placement of the facial features is more important than the drawing of the features themselves. Andrew Loomis

    Also Check: Plant Drawing Step By Step

    Go Over The Drawing With Ink And/or Color

    If you’ve decided to go over your drawing in ink, then pull out your pen collection and find a favorite. You can either go over the graphite lines with the same pen for a consistent look orif you have pens with varying nibstry using a bolder pen for the horse and a finer line for the extra elements. This way, the horse head will stand out.

    Remember to take a few extra minutes to let the ink dry before you begin erasing, just in case. After enough time has passed, slowly erase any visible sketch lines and voila! You now know how to draw a horse head from the side!

    Dividing The Face Into Three Parts

    The next step requires a know-how of the universal proportion of the face. All adult faces regardless of individual appearances share the same proportion the distance between the hair-root line and the bottom edge of the chin can be divided in three equal parts:

  • From the hair-root line to the eyebrow line
  • From the eyebrow line to the base of the nose
  • From the base of the nose to the bottom of the chin.
  • Observe on the model where the hair-root line is intended by nature and mark this line on the drawing. Divide the distance from that line to the bottom of the head into three equal parts by eye or using a pencil as a measuring stick. Do it as accurate as you can precise location of these three parts will help you in placing facial features correctly.

    If the models head is on the same level as yours, you would see those three lines horizontal. When the model is located higher than a viewer, lines will be curved upward. The opposite is also true lines will be curved downward when a models head is located lower. The curvature depends on the view angle.

    To keep things simple for this exercise, we draw a portrait at our eye-level.

    You May Like: How To Draw Praying Hands Step By Step

    How To Draw Anime Explorer Hat Step By Step

    The explorer hat is often worn by anime characters that are on some sort of an adventure, often in a jungle type environment.

    Stat by drawing an outline of the head and hair.

    Draw the top part of the explorer hat as close to a half circle in shape and a much lighter curve for its bottom. Make the brim fairly short. Draw its shape following the bottom curve of the top part of the head a slight distance away and then sticking out a little bit more to the sides.

    For the finishing touches you can add the split lines between the different panels that are so icon of these explorer hats along with a button like shape on the very top.

    To show the panels simply draw a pair of curved lines from each side of the hat towards its top tip and add the button at the very top where those lines meet.

    Finish the drawing by adding some basic hair details.

    You can see a close up drawing of the explorer hat above along with some basic hair shading.

    The Cross Cross Of The Ball Nose And Eyebrow Lines

    How to Draw Faces Looking Down || Loomis Method Monday Ep 3

    Once we have the ball drawn, we draw in a line through the vertical center of the face, which will represent the line where we will draw the nose. We will also draw a horizontal line through the ball, representing the eyebrow line. Together these lines form a cross and are of utmost importance to getting the Loomis construction right.

    Okay, you say, but Gvaat, it is hard to draw a ball, or a sphere and place these lines on it. Yes, indeed it is, it requires some knowledge of perspective.

    But, dont worry, Gvaat has you covered. Here is what you can do for practice. Use a real life example and draw this sphere from life a few times before drawing from imagination. You can use either a basketball a large sphere with the Loomis guiding lines already established, or a golf ball.

    Alternatively, you can buy a golf ball, and draw the lines yourself with a permanent marker. After a while, try to draw from a sphere without the lines on it, and then try to draw from imagination.

    These cross lines divide the ball into four equal parts, meaning they are centered on the ball.

    Where these two lines meet is the cross on the ball.

    The cross or the point where the brow line crosses the middle line of the face, is the key point of the construction of the whole head. Andrew Loomis

    The cross is important because it determines the direction of the face, or the position of the face on the ball. The brow line, when moved around the entire ball, assists in finding the position of the ears.

    Also Check: How To Draw Deku Step By Step

    Shading The Area Above The Upper Eyelids

    The area below eyebrows has darker tones than upper eyelids. So, we could build up tonal values to block the area above the eyes.

    Go light with rendering upper eyelids. We will come back to darken these tonal values to required depth later on. It is a good technique to build tones gradually. A proficient way of applying pencil strokes is along objects contours. Also, if you are drawing in graphite pencil, smudging pencil marks is a big no-no. I will explain why later.

    Lightly Sketch The Basic Shapes

    Just like we did for the head of the horse, you’ll want to begin by drawing the basic shapes of the horse’s body. Lightly sketch a circle for the head, and long oval-like shape for the nose. Connect the head to a thick neck which continues to the large circle of the chest. This will connect to a smaller circle by way of two gently sloping lines. Consult your reference photo to see if you have the basic proportions more or less in place, but don’t worry too much if it isn’t perfect.

    Don’t Miss: Wolves Howling Drawing

    Drawing The Smaller Details Of The Face & Finishing The Line Drawing

    At this stage you can erase the parts of the face that are covered by the hair and add the smaller details o the eyes such as the eyelashes, pupils, and highlights. You can also shade in the eyelashes and add some more details to the hair.

    When drawing the eyes you can lightly outline the highlights with a very light lines so that if you shade the eyes you dont accidentally shade them in also.

    Once you are done you should have a finished line drawing of an anime girls head and face.

    This is technically a finished drawing and you can leave it as is but if you want to go a little bit further you can move on to the next step for the shading.

    You can see the finished line drawing of the facial features without the hair in the way in the illustration above.

    Defining Contours Of The Face

    2014.11.05 How to Draw a Head Looking Up and Down

    Contours of the face are very important virtual lines that help to define portraits likeness.

    A contour should not be confused with an outline. In the drawing below, contours of cheekbones and jawlines are marked as contours. These lines are individual angles of which have to be measured on the model. Contours here describe the shape of the models face.

    Also Check: Clown Face Drawings

    Flatten The Sides Of The Spheres

    In order to eventually attach the ears to the head, we need a place to put them. If you havent noticed, the sides of a persons head arent round. Not like the orange. So, we need to change this sphere so it isnt so round! So, we need to flatten the sides. If you think back to the orange to get the desired effect youll just be cutting off a bit from either side of the orange.

    Look at the right two examples on our reference, we are looking at the face from the front. You can see how the sides have been shed, this will be useful later. From the side shedding those ends dont make much of a difference, but if we look at the three-quarter view at the top right, it affects the whole shape that we draw.

    The horizontal line that cuts the sphere in half, is the line that shows where the eyebrows will be placed on the face. So this is an important line to keep in mind as we continue to break down the face to see where the facial features will be placed.

    More articles

    Popular Articles