Saturday, May 28, 2022

How To Draw A Ribbon Banner

You May Be Interested

How To Draw A Wave Banner: Base Sketch

How To Draw A Ribbon Banner step by step | Learn Coloring | How To Write Your Name On Ribbon Banner

Step 1: Draw the base banner curve

Let’s draw the base curve for our wavy banner. It is made of two distinct parts: The first part is the long wide arch at the top – again, draw it wide enough to fit your intended message. Then add the folded ribbon ends. These are made of two mirrored “S” shaped curves, one on each end.

Step 2: Add banner sides

Next, add the sides of the banner – four short lines up from the base curve, all the same length, as tall as you want your ribbon to be.

Add two lines at the ends of the line, and two more at the top corner of the “S” curves, to the furthermost point where the line changes direction.

If you have a keen eye, you will notice that our lines are not completely straight, but slightly curved in, to keep the overall dynamic, wavy feel of the ribbon.

Step 3: Draw the upper edges of the banner

Now it is time to draw the upper edges to close the wave banner shape. These are simple curves parallel to the contour of your baseline.

Step 4: Add the missing banner fold lines and cutouts at the end

The very last step to complete the wave banner drawing is to add two more upward edge lines at the inner folds – the two low corners of the “S” curves.

An option to add some contrast to the smooth lines is again to draw the “V” cutouts at the ribbon ends .

Create The Ends Of The Ribbon Banner

Make a smaller rectangle which is the same height as the middle band. You can either create a new layer and use the Rectangular Marquee tool again, or duplicate the middle band layer and change the size.;Move this smaller rectangle down and to the side.

Use the Polygonal Lasso tool to draw a triangle on top of your new, smaller square.;Hit backspace or delete to remove the triangular area.

Duplicate the layer and flip horizontally .;Move the flipped layer to the other side of the ribbon and place the two end layers underneath the middle band layer.

Next were going to create the drop shadows, although you could do this at any point once you have the middle and side ribbon pieces made.;On the middle piece, create a drop shadow.;Copy the layer styles to the two ends of the ribbon.

How To Draw A Double Banner: Outline Steps

Step 1: Outline the upper banner line

Since the double banner drawing is a bit more complex, we will outline the banner in several steps, so we do not get lost. Start with drawing out the upper text area of the banner – the top “S” curve and the lower “J” shaped edge that turns down to the next line. Notice we are not drawing the line all the way out to the end – that is because we will round off the sharp corners later.

Step 2: Outline the lower banner line

The lower text area is a mirror image of the upper one – the “J” curve at the top, and the “S” curve for the bottom edge. Again, do not draw all the way out to the corners.

Step 3: Close the vertical sides of the banner

Now it is time to close off those corners! Draw the vertical ends of the ribbon on both sides for both text areas slightly curved out, and round off those sharp corners.

Step 4: Outline the final ribbon edges

Complete the banner shape by outlining the remaining sketch lines – the cut-out edges and the vertical lines for the folds.

Step 5: Shade the banner

Here comes the important shading part again to bring out the shape and folds of the banner.

As with the simple banners, hatch the small triangles in the “S” shaped end folds. Then use the same vertical hatch lines to shade the middle part between the two banner rows, where the ribbon returns from one line to the other.

Read Also: Hugging Knees Drawing

Simple Steps To Drawing Banners

by Krystal WhittenAugust 06, 2016

A nicely placed banner will take your design up several notches! They’re impressive, and with a little practice, you can be creating some really fun designs with them.

So I’ll show you the basics in a 3 different ways, and there’s a worksheet at the end that you can download for FREE and print to try it out yourself.

Let’s just jump right in.

Drawing A Bullet Journal Banner

HOW TO DRAW A RIBBON BANNER EASY

Starting with simplicity, drawing a banner for your bullet journal does not have to be hard! Now! We have a printable at the end to help you!

So lets get cracking

Step 1: Draw a simple rectangle.

Step 2: Draw a line downwards from rectangle not to far from the edge. Follow up with a perpendicular line going further out than the rectangle.

Step 3: Draw a parallel line to the bottom extending the same distance as the bottom line. Connect the rectangle edge to the bottom corner. Pop a small dot between those two parallel lines, this will help you draw even ribbons.

Step 4: Draw in the ends of the ribbon, and shade the ribbon connection. Boom. Done.

Don’t Miss: Easy Fox Drawing

Making The Bullet Journal Banner Better

Up and down: Pop the ribbon ends on the top and bottom

Curve it: Instead of going straight, add a small curve!

Double up: Create two rectangles the same as above, connect them in the middle, and add one ribbon at the top and one at the bottom.

Try a little dog ear!

Try wrapping your ribbon around a box

Pop it on a wavy flag!

What To Use To Draw Banners

You can use almost any drawing medium to draw banners in your journals and on your cards.

Tombow pens are also perfect for learning how to hand letter!

If you dont want to invest in those, any pen, pencil, marker or colored pencil would be perfect for these banners.

I love these sketchbooks for practicing my hand lettering, banner drawing, doodling and more!

Read Also: How To Draw A Wave Step By Step

Easy Steps To Draw A Banner On Your Bullet Journal

1- Start drawing a rectangle as big as your title will be, then add on each side two horizontal lines, and draw the ribbon point on each point, as the final touch so the ribbon look more realistic, you can draw a diagonal line to connect the ribbon fold on each side this will make your banner looks 3D.

2- Add one layer of color to the banner.

3 As a final step, you can add a second layer of color just on the ribbon folds with a darker tone of the same color.

I like how these Staedtler color pencil add a fine layer of color on the banner, you dont need to work hard to add the color to the drawings.

As the color pigment on these pencils is high quality, to add the color to your doodles on your bullet journal wont take more than 30 seconds depending on;the size of the doodles.

How To Make An Easy Ribbon Banner

HOW TO MAKE A MULTI-TIER RIBBON BANNER | Adobe Illustrator Tutorial for BEGINNERS

August 3, 2021 By: Katie

Use up that ribbon stash to make a simple ribbon banner for your next celebration. Below is the Ribbon Banner step-by-step Tutorial.

Every year the company I work for has a big convention for thousands of demonstrators from all over the US and Canada.

They come into our building as a part of the Home Office Tour and my desk is the very first thing they see as they come in the door. So, of course, I made them a fun banner to say hello!

Don’t Miss: How To Draw A Beach Ball

Details Of How To Draw A Heart With Ribbon Banner W/ Galaxy Coloring

how to draw, how to draw a heart with ribbon banner,galaxy heart,mothers day heart,valentines day heart,I love you heart,cute drawings,how to draw,step by step easy,follow along drawing lesson,tutorial,coloring,art for beginners,cartoon drawings,things to draw when bored,what to do when bored

#Draw #Heart #Ribbon #Banner #Galaxy #Coloring

Happy Mothers Day, Happy Valentines Day or just simply a Heart to say I LOVE YOU. Follow along to learn how to draw and color a Galaxy Heart with Ribbon Banner easy, step by step art tutorial.Easy, simple follow along drawing lessons for kids or beginners. Fun, Cute art!Learn How to Draw the EASY, Step by Step Way while having fun and building skills and confidence. Learning videos for all ages.Drawing Tutorials on everythingand Everyday Objects can all be found here at Draw So Cute!You can learn how to color with markers, color pencils and much more. Coloring pages.FUN ART CHALLENGES, DIYs and Coloring Pages and Activities can also be found here!Celebrate Mothers Day, Fathers Day, Christmas, Valentines, New Years, Birthdays, etc. with Cute drawings just for the occasion!Enjoy Art and have fun being creative and becoming an artist!

SUBSCRIBE:

-Website: Download FREE coloring pages and crafts:-Facebook:

Kick Your Bullet Journal Header And Banner Up Another Notch

Yes you heard right! Using the same system, keep the ribbons smaller and add extra curves to it.

Double double! Create 2 rectangles and 4 ribbon ends

Doodles: start in pencil and try adding floral doodles around the boarder.

Shade it and color it in! FUN!

As always thank you so much No lemome Note books were harmed in the making of this How too

Read Also: How To Draw A Simple Fox

How To Draw A Straight Banner

For this super simple straight banner, begin by drawing two, straight parallel lines.

Connect the lines to form a rectangle.

Then, add a small, slanted line to the top left and top right sides of the rectangle.

Add a flag shape to each of these lines.

Lastly, add a small, straight line to connect your flag shapes to your banner.

Thats it!

Simple, yet cute, banners to add to all of your handmade creations.

Thanks so much for reading all about How to Draw a Banner .

Have a great day!

How To Draw A Banner Ribbon

Adobe Illustrator Tutorial – How to make a Ribbon Banner in 4 different ways

Draw a curved line on one side of the banner.Draw a straight line between the top and bottom of the ribbon, indicating a fold and overlap of the banner material.Draw the base banner rectangles.

Draw two lines on each side slightly below the top of the rectangle.Duplicate the layer and move to other side of the ribbon, adjusting layers as necessary.Fill in the triangle with a darker color using the paint bucket.First, draw two parallel, wavy lines.

Gambarnya seperti ini yang akan kita buat;Hand draw colorful ribbon collection.Hand draw elements star and ribbon banner cartoons vector illustration graphic design.Hand drawn isolated holiday design elements.

Here we are drawing the banner.How to draw a banner.How to draw a banner.a banner is a flag or other piece of cloth bearing a symbol, logo, or other message.How to draw a ribbon banner easy.

How to draw a ribbon banner.How to draw ribbon banners best personal planner.How to make an easy ribbon banner.I just love the look they give to journals, notes, and doodles.

I prepared a step by step tutorial for you to follow in learning how to draw a banner.draw overflowing lines forming a folded like cloth.I used 13 different ribbons all with different widths and textures.In a new layer, use the polygonal lasso tool to draw a triangle.It would be perfect for a name or fun greeting.

You can cut longer or shorter depending on the look you are going for.You should learn first how to draw a banner.

You May Like: How To Draw A Skull Side View

Watch How To Draw Ribbon Banners In Procreate

*Throwback Thursday Note: this is a post from 2017. We are re-promoting it. While Procreate has had updates over the years you should still be able to follow along and make this!

You do NOT need unzipping tools anymore on iPad! To learn how to use our brushes and install, visit our Instructions page.

How To Draw 11 Of The Easiest Bullet Journal Banners And Headers

May 23, 2018

Have you been struggling with creative inspiration? Looking to make simple bullet journal banner and heading doodles and need some inspiration? Ones that are easy and simple to draw or doodle?

We literally have 11 of the easiest banners for you to draw! These simple banner ideas for bullet journals will add some excitement and artistic doodles to your page with minimal effort!

In our last post we covered headers. It can be so challenging sometimes to come up with some fun ideas for your bullet journal spreads by adding these really easy to do bullet journal banners and headers.

This time I am going to show you 1 simple banner design that you can jazz up easily. So easily. In fact all you need is a pen and your journal, or a napkin, paper, whatever. So lets get started! If you have tried it, it would be great to share with us over at @theartofbujo and #taobhowto. You can find more how-to and tips here

Read Also: How To Draw A Brain Easy

How To Draw A Ribbon Banner Easy

How to draw a banner sharing by how to draw banners by art gold ribbon banner vector tutorial sketchnote lessons banners and ribbons

How to draw ribbon banners best personal planner 17 straight simple banner vector images ribbon clip art graphics and newdesign hearts with ribbons s easy how to draw a perfect banner every time tombow usa how to draw a ribbon banner now

Drawing A Banner Materials:

How To Draw a Ribbon Banner!!!

paper & a marker !My particular marker is the Tombow Dual Brush Pen in black

Step 1: Draw a curving line.This will be the top of your banner. You can make it as long or as short as you likethink about what youre going to write inside and use that to gauge how big your banner needs to be. If you want, you can even pencil in your word first and then work around it to make sure its the right size.

Step 2: Draw a matching curved line for the bottom of your banner.This line should be slightly shorter than the one on the top. Dont worry if its not absolutely perfectremember, this is art!

Step 3: Connect your top and bottom lines with two short vertical ones.I like to make mine curve outward just slightly.

Step 4: Draw a line a little more than halfway up each side of your banner to create the top of the tails.;

Step 5: Finish off your tails. To do this, make a sideways v shape, then connect back to the bottom of your banner.Again, dont worry about perfection here. The sides dont have to be identicalthey wouldnt be on a real banner either.

Step 6: Make a small curving line connecting the bottom corner of your banner to the place where the tail connects to it.This creates the appearance that the banner is folded.

Step 7: Add details if you like.This part is totally optional, but if you want to get fancy, you can do things like adding short lines to highlight particular spots and coloring in that folded area you just drew.

Recommended Reading: How To Draw A Simple Horse

How To Draw A Ribbon

wikiHow is a wiki, similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 11 people, some anonymous, worked to edit and improve it over time. This article has been viewed 51,672 times.Learn more…

A ribbon is a strand of any material such as cloth, a paper or a plastic that is used to tie packages. It can also be used as an ornament on dresses or polo shirts or even to tie womens long hairs. To learn how to draw a ribbon, follow then this tutorial and learn how to draw a ribbon containing polka dots.

How To Draw A Banner: Finished Double Banner Drawing

Finished double banner drawing

Here is the completed masterpiece – the finished double banner drawing once we have erased the sketch lines and added some lettering.

If you did not get lost in drawing the double banner, you are well on your way to knowing how to draw a banner of any shape – curved up or down, with the ends flying either side as well. And of course, you can add more layers of text as well – just repeat the same transition between the lines as many times as you need.

You May Like: How To Draw Someone On Their Knees

How To Draw A Banner: Wave Banner Outline Steps

Step 1: Outline the banner

Similar to the previous simple banner, outline all the lines, leaving out only the far edges that are cut out .

Step 2: Shade the banner

The shading for the wavy banner is again the same as for the simple square version above:;Shade the two ribbon fold corners with spaced vertical lines. Then add some horizontal lines to the main banner to suggest the tension in the folds – shorter lines in the middle and longer at the top and bottom.

How To Draw A Ribbon Banner

How To Draw Banners and Ribbons

This ribbon banner has four, easy steps. It would be perfect for a name or fun greeting.

First, draw two parallel, wavy lines.

Next, draw two small lines to connect them.

Then, draw side ribbons on each side of your banner.

Lastly, draw one small line connecting the loop on each side of the banner to the banner itself .

Read Also: How To Draw Among Us Character

How To Draw A Banner: Finished Wavy Banner Drawing

Finished wavy banner drawing

And here is the completed wave banner drawing with the sketch lines erased and some lettering added. While adding the curvy corners is a slightly harder way how to draw a banner, the result is more dynamic and interesting. The smooth curves also make the banner look more rustic and old-fashioned.

This is the perfect banner to combine with the heart drawing or some flower drawings;for your Valentine’s day or Mother’s day cards!

More articles

Popular Articles