Lending Library / Food Pantry
If your stump happens to be near your road, take full advantage of your luck and transform it into a lending library or giving pantry!
By hollowing out the core, adding a door, roof and even a solar powered light, this homeowner not only improved his front yard, but made an impact on his local community. Get inspired by visiting The Little Free Library.
Filling The Gaps Cracks And Other Wood Imperfections
Wood stabilization is a process wherein resin is injected into the wood to make it more stable or hard. You can do this by applying multiple coats of wood stabilizer. Gradually spread it in a circular motion and make sure that all surfaces are covered.;
During the cleaning and sanding process, you may notice some cracks, holes, or breaks in the wood. To preserve the quality of the wood, you need to fill in those wood imperfections.
Here are some tools that you can use to conceal wood imperfections:
- Wood putty is typically made from plastic and used to fill small holes in the wood. Minwax is one of the highly-rated brands of wood putty in the market due to its wood-like finish.
- Wood filler is a popular solution for filling any wood imperfection. It is made with sawdust, solvent, or wood fibers that can blend well with unfinished wood. The best wood fillers for tree stump projects are DAP All-Purpose Plastic Wood Filler and GoodFilla Water-Based Wood Filler.
Pro Tip: Use tape around the area where there is a possible leak and fill it with epoxy. Make sure to let it dry completely before you remove the tape.
Wood stabilization is an important step in preserving wood from tree stumps. It helps improve the woods physical properties such as strength, durability, and hardness.
However, there will still be differences in the end product as it will still depend on the condition of the wood and if the process is done properly.
How Do You Seal A Tree Stump
To stop your stump from drying out even more and to keep it from getting marked on top when you put things down on it you should seal your tree stump.
You can use any wood sealer. If you want a completely natural look Id recommend sealing it with Thompsons Water Seal which will give the look of having no finish on it at all. Just remember that Thompsons Water Seal is water based which means it can only go on natural wood or wood that has been stained with a water based stain.
I used an oil based Polyurethane to make my stump top as durable as possible. I tend to be a big spilly and bangy.
If youre using an oil based finish use a natural bristle brush.
Seal the whole stump.
Seal the top, sides and bottom of the stump 2-3 times.
The top of the stump will get really dark, but itll lighten up once the finish sinks in and dries.
After your first coat dries gently sand off any burrs and bumps.
Remember just sand lightly.
The sanding will leave the finish with a white haze. Dont worry about it. Itll go away once you apply another coat of finish. Seal the sides and underside again 1-2 more times according to the manufacturers directions.
Your stump may need up to 6 coats on the top. Because of the open grain, the finish soaks into the top a lot more and requires more coats. Always let your finish dry the recommended amount of time in between coats.
Once youve completed all coats of finish you can admire a thing of beauty.
Plus the table beside her.
Also Check: How To Draw A Simple Horse
How To Make A Tree Stump Table
Today Im sharing an easy project that anyone who can lift a tree stump can make! I had had this tree stump side table project on my project list for a long timealmost a year, in fact! Because although it is an easy project, it takes a long time to complete.
Thats because you have to ensure your stump dries completely before you start working on it, and it can take anywhere from weeks to months for your stump to dry! The dry time depends on lots of different factors, including when the tree was cut down and what conditions the stump has been drying in.
I also had to add some extra time to my project timeline because my dad accidentally turned my first stump into firewoodit had been sitting drying out at their house for so long that he thought Id forgotten about it! So when my parents recently took down another tree at their house, I immediately jumped into the wood pile to see if I could find a good candidate to start my tree stump side table project over again.
My inspiration had;a $249 price tag. Take a look at my version, which I made for $10. What do you think? I love how mine has a bit deeper of a color and a little bit more shine to it than the one I saw online. So lets chat about what I used and how I did it!
What To Avoid When Killing Tree Stumps
Here are a few factors to consider when removing or killing tree stumps to ensure safety and effectiveness:
- BleachBleach can be used to kill a stump when poured over it in high quantities, but we recommend avoiding this method since it can be detrimental to the surrounding plants. It would be much healthier for the environment of your yard to use a more natural method like Epsom salt, as this can be beneficial to plants and soil.
- Diesel fuelAvoid using diesel fuel or gasoline to burn tree trunks, since these solutions dont offer a slow, effective burn needed to properly break down the wood. Diesel fuel and gasoline can also be toxic for the surrounding plants in your yard. Instead, we suggest using minimal amounts of kerosene and kindling wood for your stump fires.
- Potential dangersEven if your city allows for burning a stump, monitor and maintain the fire until its finished burning to keep it from spreading beyond the controlled area. You should also take safety precautions when using tree removal equipment, such as a chainsaw or stump grinder, and wear the proper protective gear.
- Proximity to other plantsIf your stump is located near plants that you wish to protect, be careful when adding chemicals to the stump and keep them off any surrounding plants. For example, even though the magnesium sulfate in Epsom salt can be good for plants, too much of it can dry them out.
Recommended Reading: How To Draw A Cheerleader Pom Pom
How Do You Draw A Stump
How do you draw a stump?
What tree trunk means?;Definitions of tree trunk. the main stem of a tree; usually covered with bark; the bole is usually the part that is commercially useful for lumber. synonyms: bole, trunk. type of: stalk, stem. a slender or elongated structure that supports a plant or fungus or a plant part or plant organ.
What is the fastest way to get rid of a tree stump?;The fastest way to remove a tree stump without using a grinder is the chemical method. By applying chemicals to holes drilled into the stump, you speed up the natural decay process and the remaining tree fibers and roots will breakdown more quickly.
How does Epsom salt remove a tree stump?;A living stump will not rot and may grow new shoots. Epsom salt is hygroscopic, which means the crystals absorb water. With enough quantity added, Epsom salt pulls moisture from the wood, which then kills the tree.
How To Preserve A Tree Stump
This article was co-authored by our trained team of editors and researchers who validated it for accuracy and comprehensiveness. wikiHow’s Content Management Team carefully monitors the work from our editorial staff to ensure that each article is backed by trusted research and meets our high quality standards. This article has been viewed 123,202 times.Learn more…
A tree stump can add a rustic touch to your home, especially if it has a nice wood grain. You may come across a tree stump in the forest or have 1 cut at your local lumber yard and wonder how you can preserve it. Start by cleaning and sanding it so it appears smooth. You can then apply wood stabilizer and sealer to the stump so it does not crack, warp, or rot, leaving you with a beautiful, natural piece for your home.
Also Check: Emperor Penguin Drawings
Is It Better To Grind A Stump Or Remove It
The stump removal process is the more intrusive of the two. Grinding is much more efficient than stump removal, however, it does leave the trees roots behind. If the stump is large, the chip pile produced can also be quite large, but the chips can be used as mulch for other plants in your landscape.
Draw The Trunk & Large Branches
Now draw out the actual shapes of the trunk and larger branches of the tree.
Generally the trunk and branches get progressively thinner as they go towards the top so be sure to keep this in mind when drawing. You also want to add some bumps and fairly sharp twists here and there to make the branches look more natural.
Don’t Miss: How To Draw A Simple Airplane
Frequently Asked Questions About Killing Tree Stumps
How long does it take for tree stumps to naturally decompose?
It takes about three to seven years for tree stumps to naturally decay on their own. However, the actual time will depend on your location, environment, climate, and type of tree. Generally, the lower the stump is cut, the quicker it will rot.
What are the best tree stump remover products?
Popular herbicide brands, including Spectracide, Stump Stop, and Bonide, make tree stump killer solutions to use on your pesky stump. You can also use natural solutions, such as Epsom salt, saltpeter, and rock salt, to remove your tree stump.
Can I remove a stump without professional help?
If youre considering removing a stump on your own, you can rent a stump grinder to break up the wood and cut off the roots. You can also start a controlled fire to slowly burn the stump down. However, hiring a professional can save you time and effort, since theyll have the proper equipment and expertise needed to take care of your stump.
What is the best way to kill a tree stump?
The best way to kill a tree stump depends on how much time youre willing to wait. If you need to remove the stump as soon as possible, hiring a professional to dig it out of the ground may be the best option. If you dont mind waiting for a few months to a year for the stump to completely decompose, we recommend using Epsom salt to accelerate the natural rotting process.
To share feedback or ask a question about this article, send a note to our Reviews team at .
Do It Yourself Stump Killer
Select a warm, dry day and fill a spray bottle with undiluted white vinegar. Spray vinegar to thoroughly coat the leaves of shoots growing back from the tree roots and stump. This destroys the leafy top growth that is supplying the roots with food and eventually kills the remaining tree roots.
Recommended Reading: Side View Skull Tattoo
Trim Up The Tree Lyrics
Trim up the tree with Christmas stuffLike bingle balls, and whofoo fluffTrim up the town with goowho gums and bizilbix and wumsTrim every blessed window and trim every blessed doorHang up whoboohoo bricksThen run out and get some more!Hang pantookas on the ceilingsPile pankunas on the floorTrim every blessed needle on the blessed Christmas treeChristmas comes tomorrowTrim up your pets with fuzzle fuzzAnd whiffer bloofs, and wuzzle wuzzTrim up your uncle and your auntWith yards of whofut flantTrim every house in Whoville from the cellar to the roofHang up a mile of dafflersAnd three miles of snaffer snoof!Hang dang-donglers on the bathtubTrim the occupant with floofTo every home in Whoville and to every blessed WhoChristmas comes tomorrowTrim up the tree with Christmas stuffLike bingle balls, and whofoo fluffTrim up the town with goowho gumsAnd bizilbix and wumsTrim up the tree with bizilbix and wums
Tips For Drawing Different Types Of Trees
If you want to go beyond the basic trunk and bush-like foliage, youll want to notice how different trees look and model yours on a specific type of tree. For example, a pine tree will require different crown drawing techniques than an oak tree. An old tree might have deeply defined trunk details and gnarls while a young tree should have a cleaner, less marked trunk. Find inspiration for any type of tree from the reference photos available in Adobe Stock.
No matter what kind of tree you set out to draw, keep these six steps in mind. If your tree isnt looking as good as youd like, dont give up. Use your eraser as needed, but try to draw through each stroke if you can. Your lines may not be perfect, but theyll retain their continuity and energy, which is important when drawing organic shapes.
You May Like: Simple Witch Drawing
How To Draw Tree Trunks
In this tutorial we will learn to draw tree trunks using pen and ink. There are many ways of drawing tree trunks and I will explain few of the simple techniques here.
To believably draw a tree trunk, two things need to be accomplished:
Roundness is indicated by darkening one side of the trunk more than the other. Bark texture is indicated by using pen marks that imitate bark shape and texture.
Drawing an effective outline of tree trunk is also very important as without an effective outline, any texturing will not bring out the desired effect. Drawing outline of individual trunk and landscapes based on trunks is discussed in detail here.
Other Strokes To Texture Bark:
The bark stroke discussed earlier is the simplest to use to texture trunk and you should practice and get comfortable with it in the beginning. There are many other strokes that can be used as well. Tapered dark can itself be used to indicate bark as shown below. Depending on their use, age and character can be imparted to the trunk. Additional techniques are discussed in my workbook.
You May Like: How To Draw Jack O Lantern
Grinding The Tree Stump
This is the quickest method for killing and removing tree stumps. It involves hiring a tree removal specialist or renting a stump grinder machine to break apart the wood in the trunk and tree roots. Typical prices for this job are around $100$400. Stump grinder machine rental costs typically fall between $80 and $150 for a four-hour window.
To grind a tree stump, start by trimming the stump with a chainsaw, digging around it and removing any rocks. Then, use the machines cutter blade to chip away at the wood and cut any roots that are connected to the stump. This process can take anywhere from two to six hours depending on the size of the stump. Once youre finished, spread dirt in and over the hole, adding topsoil or mulch if desired.
Tree # : Umbrella Tree
This tree was especially fun to draw.; I started to draw it by drawing the ovals for the leaf parts.; I decided on four, but if you want more, that would be quite awesome too! Then I added some squiggly lines coming down to the same area for the tree trunk.
I added more lines to create thicker trunk branches, added more branches going out to the umbrellas and added a few empty branches as well.
I added more details to the trunk, made more squiggly branches, and added some shading to the umbrella portions.
A bit of grass, and some textures on the umbrellas, also make the umbrella textures thicker on the bottom and thinner on top.
Also Check: How To Draw A Magnolia Flower Step By Step
Dig The Tree Stump Out Of The Ground
Digging out a tree stump is one way to remove it from your yard, but it can require time-consuming work that can be potentially destructive to your yard or garden. This method allows you to remove as many tree roots as possible and ensure that the stump doesnt continue to grow. To save time and effort, consider hiring a professional with digging equipment to handle the job.
Heres how to dig a tree stump out of the ground:
Note: This process can take multiple hours of labor, depending on the size of the tree stump and the root structure.
How To Kill A Tree Stump
From home remedies to professional solutions, heres everything you need to know about getting rid of a tree stump in your yard.
Cutting down trees in your yard is a great way to improve the natural lighting for other plants and make way for new trees to grow. If youve removed a tree in your yard, you know how pesky its leftover stump can be. While you could leave it alone, it could start to grow, sprouting annoying shoots from its roots, or it may take years to naturally rot and decompose. Try the following techniques to kill the tree stump and remove it from your yard.
Also Check: Prids Drawing Salve Target